Airrex AD-1250

Airrex AD-1250
590,00 €

Airrex AD-1250 is a 12 V auxiliary DC heater for vehicles.

Product Description

Product Description

Airrex AD-1250 is an auxiliary DC heater for different types of vehicles. The heater is extremely easy to install. Simply connect the power cord to the battery and mount the heater in the desired location, and the heater is ready for use.

Airrex DC heater generates heat just 10 seconds after starting. The DC heater has a remote control on a cord, which can be used to set the desired temperature and fan speed. The device also has a thermostat with a cable, which can be moved to the desired measurement location.

Airrex AD-1250 is equipped with a low-voltage sensor that stops it from draining the battery in case of a low battery charge. Airrex AD-1250 heater has a 12-month factory warranty.

Typical applications of Airrex AD-1250 include:

Transport vehicles: Food product transport

Camper vans: Living space heating

Electric cars: Cab heating

Earthmovers: Cab heating

Lorries and vans: Cab and/or cargo space heating

Boats: Cabin and cockpit heating

Emergency vehicles: Transport space heating

Military vehicles: Cab and/or cargo space heating

Technical description

Technical description

Seven reasons to choose Airrex DC heater:

1. AV (Activated Variable) heating element

The AV heating element is not a ceramic PTC heating element. The AV heating element generates heat more evenly, does not cause voltage variation and is more durable than a PTC element.

2. Automatic switch-off at low battery charge

When the battery charge falls, the heater automatically shuts down, which protects the vehicle’s electrical system.

3. Temperature setting

The heater can be set precisely to maintain a stable temperature. The heater is switched on and off when the temperature goes two (2) degrees below or above the setting temperature. The setting temperature must be higher than the ambient temperature.

4. Overheating prevention system

The internal safety circuit switches off the heater if one of its parts is in danger of overheating.

5. Latching relay for up to 100 A input

Regular relays need a continuous control voltage, but the latching relay only needs approximately one second of power. This improves reliability and safety.

6. Moveable temperature sensor

The 1.5-metre cable of the temperature sensor makes it possible to put it in an optimal location.

7. Monitoring

You can monitor the battery charge, current temperature, the target temperature set and the fan power setting on the display.

Technical specifications

Technical specifications

Operating voltage: 12 V
Input power: 500 W
Fuse: 70 A
Weight: 1.9 kg
Size (WxDxH): 270 x 220 x 115 mm